99% Latanoprost

Product Name: Latanoprost
CAS No.: 130209-82-4
MOQ:1g
Assay:99%
Form: oil
Packing:1g;10g;10g;1kg
Used: Pharma grade or research
Delivery Time:in stock
Shelf Life: Two years
Payment: T/T, LC or DA
Certifications: ISO9001, ISO22000, HACCP, HALAL, KOSHER
  • Fast Delievery
  • Quality Assurance
  • 24/7 Customer Service
Product Introduction

What is 99% Latanoprost?

99% Latanoprost is a prostaglandin analog that belongs to the family of prostaglandins. Prostaglandins partake a common point of having substituents on the cyclopentane ring. PGF2α prostaglandins and prostaglandin analogs generally have two hydroxyl groups on the cyclopentane ring, which are in a cis configuration relative to each other. They also have two side chains in a trans configuration to each other, and each side chain contains a double bond. Prostaglandin analogs of PGF2α can have different figures of double bonds on their side chains and different substituents along the side chain. also, in some PGF2α analogs, the carboxylic acid group on the side chain can be esterified. It is a PGF2α analog with a logged side chain, and the carboxylic acid group is esterified. This emulsion is clinically used to reduce elevated intraocular pressure in cases with open- angle glaucoma and optical hypertension.

Basic Information

Product Name: Latanoprost

CAS No.: 130209-82-4

MF:C26H40O5

MW:432.59

EINECS:634-172-9

MDL No.:MFCD00216074

Boiling point:583.8±50.0 °C(Predicted)

Density 1.093±0.06 g/cm3(Predicted)

storage : Preserve at 2℃~8℃ in airtight and light resistant containers

solubility DMSO: freely soluble

Appearance:light yellow oil

Stability: Stable for 2 years

Structural formula:

130209-82-4.webp

Quality standard

Tests

Specifications

Results

Appearance

Colorless to pale yellow viscous oily liquid

Conforms

Solubility

Very soluble in Acetonitrile, freely soluble in Ethyl acetate and in

Ethanol, practically insoluble in water


               

Conforms

Identification

HPLC The retention time of the major peak in the chromatogram of Assay medication corresponds to that of the Standard medication as attained in the assay.


               

Conforms

IR: The IR Spectrum of the same should be consistent with that of the reference standard.

Conforms

Optical rotation

+31.0° ~ +38.0 ° (10mg/ml of Latanoprost in acetonitrile)

+34.4°

Residue on ignition

NMT 0.5%

0.06%

Water

N.M.T.2.0%

0.05%

Residual solvents

Ethanol N.M.T. 0.5%

0. 17%

n-Hexane N.M.T. 0.029%

Not detected

Related

Substances

Isopropyl diphenyl phosphoryl pentanoate N.M.T. 0. 1%

Not detected

Latanoprost related compound B N.M.T. 0.5%

Not detected

Latanoprost Related compound A N.M.T. 3.5%

Not detected

Latanoprost related compound E N.M.T. 0.2%

Not detected

Any unspecified impurity N.M.T. 0. 1%

0.09%

Total impurities N.M.T.0.5%

0. 16%

Assay

94.0~ 102.0% (calculated on the anhydrous and solvent-free basis)

99.7%

Conclusion

Conform to USP

Function & Application

99% Latanoprost is a synthetic drug, which is a prostaglandin F2α analogue. The following are the functions and applications:

Reduce intraocular pressure it's substantially used to treat glaucoma and high intraocular pressure. It lowers intraocular pressure by adding waterless exodus and reducing waterless products, therefore relieving symptoms in glaucoma cases.

Promote relaxation of the ciliary muscle it can stimulate relaxation of the ciliary muscle, which dilates the pupil. thus, it's generally used as an adjuvant medicine before ophthalmic surgery to help give better visual field and operating conditions.

Treat eyelid ptosis it can also be used to treat eyelid ptosis by promoting compression of the eyelid muscles, and perfecting drooping of the eyelids.

Other operations it's also used to treat other eye conditions similar as keratitis and corneal ulcers.

It should be noted that It is a tradition medicine and should be used under the guidance of a croaker. During use, some side goods may do, similar as eye vexation, eye greenishness, and blurred vision. However, immediate medical attention should be sought, If serious adverse responses do.

Preparation

Weigh 0.504g of PGX-17 (0.65mmol) and add it to a 50ml round-bottom flask equipped with a magnetic stirring bar. Add acetone (6.5ml) to the flask, and store the resulting colorless solution at room temperature under a gentle stream of argon gas. Prepare an aqueous solution (0.9mL) of pyridine tosylate (Aldrich, 13mg), and add it to the reaction solution. The resulting white turbid suspension is stored at room temperature under a stream of argon gas. After approximately 20 minutes, the mixture becomes transparent, forming a colorless solution. After 3 hours, TLC analysis shows complete conversion to the desired product. Stop stirring, and remove the acetone from the reaction mixture through vacuum concentration. Distribute the residue between ethyl acetate( 10mL) and impregnated sodium chloride result( 15mL). Separate the organic phase, and prize the waterless phase with fresh ethyl acetate( 2 ×7.5 mL). Wash the combined organic excerpts with impregnated sodium chloride result( 2 × 10mL), dry with sodium sulfate(0.5 g), and dematerialize under reduced pressure until dry. Obtain a colorless oily crude product. Purify the crude product by rapid column chromatography. Use silica gel 60 (6g) and a mixture of hexane/ethyl acetate (1:1) as the eluent for the rapid column. Dissolve the crude product (taking out 7mg as a reserved sample) in the eluent (2ml) and load it onto the column. Subsequently, eluting with a mixture of hexane/ethyl acetate as described below, combine the fractions containing the pure product, and evaporate under reduced pressure until dry. Obtain a colorless, viscous oily pure product, and dry it under high vacuum (0.01kPa) to constant weight (0.251g, 89.3% yield).

Production method

Compound (Ⅰ) is dissolved in toluene and cooled to 18℃. N, N'-Dicyclohexylcarbodiimide (DCC), and phosphoric acid are added, followed by the addition of (4-phenyl-3-t-butyloxycarbonyloxy) triphenylstannane iodide. The reaction results in the formation of a compound (Ⅱ), which is then converted into the final product through six additional steps of reaction.

Molecular structure

Latanoprost contains a pentene ring with α- and ω-carbon chains. The ester moiety at the end of the α-carbon chain facilitates corneal penetration. In the corneal stroma, Latanoprost is hydrolyzed into the free acid form, which serves as the active moiety. It binds to the FP receptor and contains a hydroxy group at C15. At the end of the chain, there is a short ω-chain and a phenyl ring, which are important for its pharmacological effects.

Packing & Shipping

Packing: 1kg/foil bag;5kg/carton;25kg/fiber drum;or packing as your request.

Customization:Customized logo;Customized packaging;Graphic customization

Shipping:

Item

Quantity

ETA time

Shipping Method

By Courier

≤50kg

7-15days

Fedex, DHL,UPS,TNT,EMS ect.

Fast and convenient

By Air

50kg~200kg

3-5days

Fast and cheap

By Sea

Large quantity

20-35days

Cheapest way

Payment Term

 payment.webp

Why Choose Xi'an Yihui?

Customer feedback

 Customer Comments.webp

Xi'an Yihui certificates

 certificate.webp

Xi'an Yihui Factory & Warehouse

 00Factory & Warehouse.webp

Our Advantage

Rich experience: we have 13 Years of professional experience;

Customers all over the world: sell to more than 100 countries;

Provide diversified products: the products have been applied to all major international brands in the fields of drugs, dietary supplements, cosmetics, animal nutrition and functional food.

Price advance: low MOQ with competitive price;

Quality certification: ISO; Halal; Kosher certified

After-sales service: Professional team 7*24 hours customer service.

In conclusion

In summary, as a professional 99% Latanoprost manufacturer, we have advanced technology, scale advantage, the best quality, rich production experience, and excellent services. These advantages will make it stand out in the market competition and win more customer trust and support. if you need it, pls feel free to contact us any time. we will reply you asap.

our contact information:

E-mail: sales@yihuipharm.com
Tel: 0086-29-89695240
WeChat or WhatsApp: 0086-17792415937

Hot Tags: 99% Latanoprost, 130209-82-4, Latanoprost,Suppliers, Manufacturers, Factory, Bulk, Price, Wholesale, In Stock, Free Sample, Pure, Natural

hot tags: 99% Latanoprost,China, manufacturers, suppliers, wholesale, buy, factory, Bulk, price, for sale

Send Message

If you have any enquiry about quotation or cooperation, please feel free to email us at E-mailor use the following enquiry form. Our sales representative will contact you within 24 hours.Thank you for your interest in our products.

Send